Lin Engineering

Precision motors for surgical robotics

Built for every axis of motion

From articulated arms to surgeon controls, each axis brings a different balance of torque, response, packaging and thermal requirements.

Discuss your application
Content image

Motion at the joint

Frameless torque motors integrate directly into compact robotic joints, with space for through-axis routing.

Control at the instrument

Slotless brushless and coreless brushed motors offer compact options for surgical instruments and responsive motion.

Engineering support

Work with Lin Engineering on motor selection, mechanical interfaces, feedback and the path from prototype to production.

Surgical robot applications

Built around the motion your system needs

Joint actuation, instrument motion and surgeon controls place different demands on a motor. Start with the mechanism, then match the motor, transmission and feedback to the operating conditions.

Articulated surgical robotic arms

Integrate frameless rotor and stator assemblies into shoulder, elbow and wrist joints. The open-center architecture supports through-axis routing, while motor selection can be coordinated with strain-wave gearheads and high-resolution encoders.

Evaluate torque across the motion cycle, joint inertia and the thermal path within the assembly, including operation under sterile drapes.

End-effectors & surgical instruments

Slotless brushless and coreless brushed motors provide compact options where instrument diameter, mass and response matter. Gearheads and feedback options can help match the motor to the mechanism.

For reusable instruments, discuss autoclavable configurations alongside the required cleaning and sterilization process.

Surgeon console adjustment

Seats, armrests and monitors need controlled positioning within the console envelope. Slotless BLDC motors provide smooth motion, with encoder, mounting and connector options to support integration.

Define the load, reduction ratio and acoustic targets together with the drive interface.

Console haptic control & feedback

Hand controllers and joysticks need responsive torque and low inertia in compact gimbal assemblies. Slotless motors eliminate cogging associated with stator teeth, supporting smooth torque production.

Coordinate motor and encoder selection with the control system to achieve the required force-feedback response.

Robotic arm system positioning

Columns and bases bring higher loads and low-speed positioning requirements during setup and repositioning. Evaluate the motor, gear reduction, holding strategy and duty cycle as one assembly, with noise, vibration and electromagnetic compatibility requirements defined early.

Motor selection

Motor families for surgical robotics

Compare the architecture, integration options and operating requirements for each axis.

Content image

Frameless torque motors

Rotor and stator assemblies for direct integration into robotic joints.

  • Open-center architecture for through-axis routing
  • Multiple frame sizes and stack lengths
  • Discuss winding, mounting and joint integration requirements
Content image

Slotless brushless motors

Compact brushless motors for smooth motion, responsive controls and instruments.

  • Zero cogging from the slotless stator design
  • Gearhead and feedback options
  • Autoclavable options for selected configurations
Content image

Coreless brushed motors

Compact brushed DC options for mechanisms where space, response and cost influence selection.

  • Low-inertia ironless rotor architecture
  • Gearheads available on selected models
  • Encoder options depend on the configuration
Content image

Reusable instruments

Define sterilization requirements early

Autoclavable motor options are available for selected instrument designs. Identify the exact motor configuration and sterilization process during selection.

Share the steam temperature, exposure time, cleaning chemistry and required cycle life so the available test evidence can be reviewed against your instrument requirements.

Discuss autoclavable options

Engineering support

Responsive engineering from prototype to production

Work directly with Lin Engineering on motor selection, customization and integration. Bring the operating points, mechanical envelope, thermal constraints and feedback requirements into the discussion.

Evaluate winding, shaft, mounting and connector changes, together with CAD requirements, prototype builds and design for manufacturability. Discuss motor attachments and subassemblies where they can simplify your assembly process.

Explore engineering services

Content image

Program support

Plan for the full product lifecycle

Define quality, documentation and supply requirements alongside the motor specification.

Quality & documentation

Review the applicable quality-system scope and product documentation with your team. Discuss traceability, BOM control, quality agreements and any PPAP or FMEA requirements for your program.

Review certifications and compliance

Production & supply planning

Discuss pilot quantities, production forecasts, pricing, inventory arrangements and end-of-life planning early. Align these with the selected configuration and your development schedule.

U.S.-based support

Lin Engineering provides U.S.-based engineering and support, with U.S. assembly capability for most frameless motors and hybrid stepper motors.

Additional motion products

Complete motion solutions

Explore additional motion products for console adjustments, positioning and auxiliary axes.

Discuss closed-loop position-control and servo requirements with our engineering team.

Work with us on your surgical robotics project

Have a motor family in mind? Request a quote with your application, operating requirements and expected quantity.

Lin Engineering · Morgan Hill, California
1 (408) 919-0200 · sales@linengineering.com