- 17 (1.650 in) Frame Size
- 0.9° Step Angle
- 1.100 in Length
- 11.33 oz-in Holding Torque
|Base Motor Part Number||ZN417-11-09|
|Frame Size||1.650 in|
|NEMA Size||NEMA 17|
|Body Length||1.100 in|
|Current (AMP)||0.8 AMP|
|Holding Torque||11.33 oz-in|
|Rotor Inertia||0.07 oz-in²|
|Number of leads||4|
|Radial Play||0.001 in @ 1.000 lbs|
|End Play||0.003 in @ 3.000 lbs|
|Shaft Run Out||0.002 TIR|
|Concentricity of Mounting Pilot to Shaft||0.003 TIR|
|Perpendicularity of Mounting Pilot to Face||0.003 TIR|
|Max Radial Load at Dimension "K" from mounting face||6.000 lbs|
|Dimension "K"||0.620 in|
|Max Axial Load||6.000 lbs|
|Maximum Case Temperature||176.00 °F maximum|
|Ambient Temperature||-4 ° to 122.00 °F|
|Storage Temperature||-4 ° to 212.00 °F|
|Humidity Range (%)||85% or less, non-condensing|
|Magnet Wire Insulation||Class B 130 deg C|
|Insulation Resistance||100M Ohm at 500 VDC|
|Dielectric Strength||500 VDC for 1 min|
Features and Benefits
We’ve Reinvented the Step Motor
Conventional hybrid stepper motor utilizes a permanent magnet in the rotor. Our patented design uses a ring magnet in the stator instead. This drastically reduces the detent torque (unenergized drag torque) because the magnetic flux path is able to reach over the stator windings and go through only the outer edge of the rotor. Reducing detent torque improves accuracy, smooth operation and reduces noise. Best of all, modifying the magnet location does not change the dynamic torque.
Zen technology significantly reduces vibration without the use of external dampers: this results in extremely smooth and accurate motion.
Z-Series motor maintains ±1.5 arc minutes error under 64x microstepping. Industry average can range from ±4.5 to ±18 arc minutes in 0.9° step motors.
By eliminating detent torque, the motor operates substantially quieter than regular hybrid stepper motor.
Vibration can cause serious problems when smooth and precise motion is critical. This is especially the case in the semiconductor industry where assemblies are getting exponentially smaller or medial applications where precision and accuracy could literally be a life or death matter.
Lin Engineering can ensure that your hybrid stepper motor is optimized to deliver the required performance for your specific application, whether it’s increasing torque at a specific speed range, reducing noise or vibration, or optimizing for minimal power consumption, or making specific modification to ensure proper and native fit within your assembly.
Customization Services Include:
- Optimized Winding
- Multiple Shaft Options
- Customized Leads & Connectors
- Customized Housings & Mountings
- Bearings & Lubricants
- Mechatronic Solutions
- Environmental Protection
- Drivers & Controllers, Encoders, Gearboxes & Accessories
The result is that you’ll get a motor that is fully optimized for your specific applications and configured to seamlessly fit with your assembly. This reduces your product's complexity, and increases the speed and ease of the assembly of your final product.
Speak with one of our sales representatives about your specific application needs by filling out a request for a quote.
Get the motor you need
Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.