Lin Engineering
Featured product media

4418 Series

4418M-01

Hybrid Stepper Motor

Specifications:
  • NEMA 17 (1.670 in) Frame Size
  • 1.8° Step Angle
  • 1.580 in Length
  • 70.81 oz-in Holding Torque
Looking For Higher Volume?

Dimensions

ModelDIM. A (length) in
4418M-011.580 in
Dimensions

Torque Curves

Speed

RPM
RPM

Motor Specifications

Part Number4418M-01
Step Angle1.8°
Frame Size1.670 in
Body Length1.580 in
Current (AMP)2 AMP
Holding Torque70.81 oz-in
Resistance1.2
Rotor Inertia0.37 oz-in²
Number of leads4
ConnectionBipolar
Weight0.65 lbs

Operating Specifications

Radial Play0.001 in @ 1.00 lbs
End Play0.003 in @ 3.00 lbs
Shaft Run Out0.002 TIR
Concentricity of Mounting Pilot to Shaft0.003 TIR
Perpendicularity of Mounting Pilot to Face0.003 TIR
Max Radial Load at Dimension "K" from mounting face6.00 lbs
Dimension "K"0.620 in
Max Axial Load6.00 lbs
Maximum Case Temperature176 °F maximum
Ambient Temperature-4 ° to 122 °F
Storage Temperature-4 ° to 212 °F
Humidity Range (%) 85% or less, non-condensing
Magnet Wire InsulationClass B 130 deg C
Insulation Resistance100M Ohm at 500 VDC
Dielectric Strength500 VDC for 1 min

Features And Benefits

Get up to 35% more torque versus a standard motor of the same size.

4418 Series NEMA 17 size stepper motors provide great length to torque ratio. This motor is perfect for applications with limited space, which require more torque than what a standard motor can provide. The 4418 delivers up to 35% more torque than a standard stepper motor of the same length.

Content image

How did we do it?

The design of the 4418 Series stepper motor is similar to our 4118 Series motor. It utilizes an 8-pole stator to maximize the torque output. However, the difference is in our patented low profile end cap (end bell) with an integrated bearing. This low profile end cap allows us to use a larger rotor, with larger magnetic surface, which produces more torque, while retaining short motor length.

Content image

Customizations & Optimizations

Lin Engineering can ensure that your hybrid stepper motor is optimized to deliver the required performance for your specific application, whether it’s increasing torque at a specific speed range, reducing noise or vibration, or optimizing for minimal power consumption, or making specific modification  to ensure proper and native fit within your assembly.

Content image

Customization Services Include: 

  • Optimized Winding
  • Multiple Shaft Options
  • Customized Leads & Connectors
  • Customized Housings & Mountings
  • Bearings & Lubricants
  • Mechatronic Solutions
  • Environmental Protection
  • Drivers & Controllers, Encoders, Gearboxes & Accessories

 

Learn More About Motor Customizations & Optimizations

The result is that you’ll get a motor that is fully optimized for your specific applications and configured to seamlessly fit with your assembly. This reduces your product's complexity, and increases the speed and ease of the assembly of your final product. 

 

Speak with one of our sales representatives about your specific application needs by filling out a request for a quote. 

4418 Series

Related Products

Downloads

Lin Engineering Catalog 2020 (PDF)
Download
Motor Numbering System (PDF)
Download
4418M 3D Models (ZIP)
Download
4418M-01 Datasheet (PDF)
Download

Get the motor you need

Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.