Lin Engineering
Featured product media

3518 Series
3518M-07
Hybrid Stepper Motor

Specifications:
  • NEMA 14 (1.390 in) Frame Size
  • 1.8° Step Angle
  • 1.340 in Length
  • 19.83 oz-in Holding Torque
Looking For Higher Volume?

Dimensions

ModelDIM. A (length) in
3518M-071.340 in

Torque Curves

Speed

Find the motor that fits your Target Torque (oz-in) and Target Speed (RPM)

Motor Specifications

Base Motor Part Number3518M-07
Step Angle1.8°
Frame Size1.390 in
NEMA SizeNEMA 14
Body Length 1.340 in
Current (AMP)0.8 AMP
Holding Torque 19.83 oz-in
Resistance7.5 ohm
Rotor Inertia0.08 oz-in²
Number of leads4
ConnectionBipolar
Weight0.351 lbs

Operating Specifications

Radial Play0.001 in @ 1 lbs
End Play0.003 in @ 3 lbs
Shaft Run Out0.002 TIR
Concentricity of Mounting Pilot to Shaft0.003 TIR
Perpendicularity of Mounting Pilot to Face0.003 TIR
Max Radial Load at Dimension "K" from mounting face6 lbs
Dimension "K"0.620 in
Max Axial Load6 lbs
Maximum Case Temperature176.00 °F maximum
Ambient Temperature-4 °F to 122.00 °F
Storage Temperature-4 °F to 212.00 °F
Humidity Range (%) 85% or less, non-condensing
Magnet Wire InsulationClass B 130 deg C
Insulation Resistance100M Ohm at 500 VDC
Dielectric Strength500 VDC for 1 min

Customizations & Optimizations

Lin Engineering can ensure that your hybrid stepper motor is optimized to deliver the required performance for your specific application, whether it’s increasing torque at a specific speed range, reducing noise or vibration, or optimizing for minimal power consumption, or making specific modification  to ensure proper and native fit within your assembly.

Content image

Customization Services Include: 

  • Optimized Winding
  • Multiple Shaft Options
  • Customized Leads & Connectors
  • Customized Housings & Mountings
  • Bearings & Lubricants
  • Mechatronic Solutions
  • Environmental Protection
  • Drivers & Controllers, Encoders, Gearboxes & Accessories

 

Learn More About Motor Customizations & Optimizations

The result is that you’ll get a motor that is fully optimized for your specific applications and configured to seamlessly fit with your assembly. This reduces your product's complexity, and increases the speed and ease of the assembly of your final product. 

 

Speak with one of our sales representatives about your specific application needs by filling out a request for a quote. 

3518 Series

Related Products

Downloads

3518M-07 Configured Datasheet (PDF)
Download
Motor Numbering System (PDF)
Download
3518M 3D Models (ZIP)
Download

Get the motor you need

Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.