- 17 (2.250 in) Frame Size
- 1.8° Step Angle
- 0.900 in Length
- 25.49 oz-in Holding Torque
|Base Motor Part Number||G3718V-02|
|Frame Size||2.250 in|
|NEMA Size||NEMA 17|
|Body Length||0.900 in|
|Current (AMP)||0.65 AMP|
|Holding Torque||25.49 oz-in|
|Rotor Inertia||0.08 oz-in²|
|Number of leads||4|
|Radial Play||0.001 in @ 1.00 lbs|
|End Play||0.003 in @ 3.00 lbs|
|Shaft Run Out||0.002 TIR|
|Concentricity of Mounting Pilot to Shaft||0.003 TIR|
|Perpendicularity of Mounting Pilot to Face||0.003 TIR|
|Max Radial Load at Dimension "K" from mounting face||6.00 lbs|
|Dimension "K"||0.550 in|
|Max Axial Load||6.00 lbs|
|Maximum Case Temperature||176 °F maximum|
|Ambient Temperature||-4 ° to 122 °F|
|Storage Temperature||-4 ° to 212 °F|
|Humidity Range (%)||85% or less, non-condensing|
|Magnet Wire Insulation||Class B 130 deg C|
|Insulation Resistance||100M Ohm at 500 VDC|
|Dielectric Strength||500 VDC for 1 min|
Features & Benefits
It runs cooler
The G3718V whisper torque motor incorporates a heat-sink design within the stator laminations to allow for passive cooling. When your motor operates cooler, you can increase power to gain more torque without overheating, or you can save energy and still perform at an optimal performance. This is what makes all G-series steppers from Lin so unique: the motors are green and energy efficient.
The G3718V is slim by design. End caps are laser welded to the stator, eliminating much wasted space in traditional stepper motor designs. This laser welding assembly eliminates the need for assembly screws to hold the motor together. This unique construction offers great length to torque ration. At only 22.8mm long, the motor produces 25 oz-in of torque. Applications can mount this motor by utilizing the 4 through holes that are designed into the stator lamination.
If encoder feedback is needed, the sleek and slim CUI encoder is a great addition to the G3718V. CUI’s incremental AMT encoder series uses a patented capacitive technology that increases durability and reduces power consumption. Choose from various quadrature resolutions up to 4096 PPR.
It’s smooth, quiet, accurate, and delivers ample amount of torque
This stepper motor is a 1.8 degree per step motor, but it is as smooth as Lin’s smoothest 0.9 degree stepper. With all the know-how and technology that Lin Engineering brings, implementing key design aspects from the 0.9 line into the G3718V has created a motor that wins in both smoothness, accuracy and torque. In traditional designs, one must compromise torque for smoothness or vice versa. With the G3718V, you can still get both.
Get the motor you need
Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.