Lin Engineering
Homeproductsstepper motorshybrid stepper motors417 series
Featured product media

417 Series

Hybrid Stepper Motor

Features and Benefits:
  • ultimate smooth motion
  • high accuracy
Specifications:
  • NEMA 17 (1.650 in) Frame Size
  • 0.9° Step Angle
  • 0.93 to 1.54 in Length
  • 11.33 to 29.74 oz-in Holding Torque

Models

Model #NEMA sizeFrame sizeStep AngleConnection TypeLength, inCurrent AMPHolding Torque, oz-inResistanceInertia, oz-in²Weight, lbs# of LeadsAvailability
417-09-18171.650 in0.9°Bipolar0.930 in0.6 AMP11.33 oz-in100.05 oz-in²0.30 lbs4online
417-09-03171.650 in0.9°Bipolar0.930 in1.2 AMP11.33 oz-in30.05 oz-in²0.30 lbs4online
417-11-03171.650 in0.9°Bipolar1.100 in1.2 AMP15.58 oz-in30.07 oz-in²0.31 lbs4online
417-11-18171.650 in0.9°Bipolar1.100 in0.6 AMP15.58 oz-in100.07 oz-in²0.31 lbs4online
417-13-13171.650 in0.9°Bipolar1.380 in0.8 AMP28.32 oz-in130.11 oz-in²0.41 lbs4online
417-13-06171.650 in0.9°Bipolar1.380 in0.8 AMP19.83 oz-in6.60.11 oz-in²0.41 lbs4online
417-15-12171.650 in0.9°Bipolar1.540 in0.6 AMP29.74 oz-in120.13 oz-in²0.53 lbs4online
417-15-08171.650 in0.9°Bipolar1.540 in2 AMP29.74 oz-in0.70.13 oz-in²0.53 lbs4online

Torque Curves

Speed

RPM
  • 417-09-18
  • 417-09-03
  • 417-11-03
  • 417-11-18
  • 417-13-13
  • 417-13-06
  • 417-15-12
  • 417-15-08
RPM

Dimensions

ModelDIM. A (length) in
417-09-180.930 in
417-09-030.930 in
417-11-031.100 in
417-11-181.100 in
417-13-131.380 in
417-13-061.380 in
417-15-121.540 in
417-15-081.540 in
Dimensions

Operating Specifications

Radial Play0.001 in @ 1.00 lbs
End Play0.003 in @ 2.00 lbs
Shaft Run Out0.002 TIR
Concentricity of Mounting Pilot to Shaft0.003 TIR
Perpendicularity of Mounting Pilot to Face0.003 TIR
Max Radial Load at Dimension "K" from mounting face6.00 lbs
Dimension "K"0.620 in
Max Axial Load6.00 lbs
Maximum Case Temperature176 °F maximum
Ambient Temperature-4 ° to 122 °F
Storage Temperature-4 ° to 212 °F
Humidity Range (%) 85% or less, non-condensing
Magnet Wire InsulationClass B 130 deg C
Insulation Resistance100M Ohm at 500 VDC
Dielectric Strength500 VDC for 1 min

Get the motor you need

Just fill out a Request for a Quote form, and tell us about your application and your needs. One of our applications specialists will review your request, and provide you with a quote promptly.