IP65_IPX7_Rated_Stepper_Motors

Environmental Protection

IP RATINGS

IP65_IPX7_Rated_Stepper_Motors
Features and Benefits:
    While our standard line of stepper motors are known for their durability, some applications require a bit more than standard protection. The IP65 and IPX7 rated stepper motors from Lin Engineering are manufactured to be completely protected from dust and survive through low pressure jets of water. Please see below for more information and request a quote to get started!
Features: • Dust Proof • Withstands low pressure jets of water • FDA approved coating Popular Applications: • Food processing • Drug manufacturing • Machine tools • Chemical manufacturing • Boating The IP65 rated series of stepper motors are totally protected against dust and able to withstand low pressure jets of water sprayed from all directions from a distacne of 3 meters. These jets of water can carry pressure of up to 30kPa from all directions at a rate of 12.5 l/min for a duration of 3 minutes. In addition to being protected from environmental factors, the coating on the IP65 rated motors is food grade.

The following motors are available as IP65  rating modification:

NEMA-17_IP65_IPX7_Rated_Stepper_Motors4118 Series

Vacuum Rated Motor Up to 125 oz-in (0.88 N-m) Holding Torque

NEMA-23_IP65_IPX7_Rated_Stepper_Motors5718 Series

Vacuum Rated Motor Up to 294 oz-in (2.08 N-m) Holding Torque

NEMA-34_IP65_IPX7_Rated_Stepper_Motors8718 Series

Vacuum Rated Motor Up to 1,288 oz-in (9.09 N-m) Holding Torque

Features:
  • Available in 1.8 Degree NEMA 17, 23  and 34
  • Protected against dust; Submersible in depths of 15cm to 1m
  • Better protection from Damaging Environmental Elements bullet
  • FDA Approved
  Specifications: The IPX7 series of motors are completely protected against dust; they are also made to withstand immersion into liquids in depths of 15cm to 1m for time periods of up to 30 minutes. In addition to being protected from environmental factors, the coating on the IP65 rated motors is food grade. The Lin Engineering 5718 series step motors are now available with an IPX7 rating. This motor is available in three stack lengths is capable of producing holding torque up to 1,288 oz-in. Unipolar and bipolar windings are available to allow for the torque and speed required to accommodate your application.  

The following motors are available as IPX7 rating modification:

NEMA-17_IP65_IPX7_Rated_Stepper_Motors4118 Series

Vacuum Rated Motor Up to 125 oz-in (0.88 N-m) Holding Torque

NEMA-23_IP65_IPX7_Rated_Stepper_Motors5718 Series

Vacuum Rated Motor Up to 294 oz-in (2.08 N-m) Holding Torque

NEMA-34_IP65_IPX7_Rated_Stepper_Motors8718 Series

Vacuum Rated Motor Up to 1,288 oz-in (9.09 N-m) Holding Torque