Buy OnlineShopping Cartex
 
 

 
 
Step Motor
NEMA Size 8
NEMA Size 11
NEMA Size 14
• Step Size 0.9 °
NEMA Size 17
• Step Size 0.9 °
NEMA Size 23
• Step Size 0.45°
NEMA Size 34
Integrated Motors
BLDC Motors
NEMA Size 23
NEMA Size17
Drivers
Drivers + Indexer
Drivers+ Controllers
Trinamic - Microchips
Power Supplies
Gearheads
Optical Encoders
Accessories
     
stepper step motor motors stepper motor step motor
Standard Motor - 4018
NEMA Size 17 Mounting
Cost Effective
Custom Windings Available (No addtional cost)
Inquire about RoHS versions
 
| BIPOLAR |    
 
0.9"
22.9 mm 		4018F-08 0.50 8.4 0.06 8.0 5.0 0.06 0.25 4
1.03"
26.2 mm
4018X-07 1.00 15.0 0.11 5.0 6.0 0.07 0.27 4
1.33"
33.8 mm
 4018S-01 1.00 21.0 0.15 4.1 4.7 0.09 0.44 4
4018S-18S 0.63 21.0 0.15 10.2 10.2 0.09 0.44 4
4018S-18P 1.26 21.0 0.15 2.6 2.5 0.09 0.44 4
1.57"
39.9 mm
4018M-04 1.10 31.0 0.22 4.0 7.0 0.13 0.48 4
4018M-05 2.50 31.0 0.22 0.5 0.8 0.13 0.48 4
1.88"
47.8 mm
4018L-04 2.10 42.0 0.30 1.1 2.1 0.20 0.66 4
4018L-06 0.90 42.0 0.30 5.8 8.1 0.20 0.66 4
| UNIPOLAR |
0.9"
22.9 mm
4018F-02 0.40 4.1 0.03 5.0 1.7 0.06 0.25 6
1.33"
33.8 mm
 4018S-10 0.40 15.0 0.11 24.0 15.8 0.09 0.44 6
4018S-18 0.90 15.0 0.11 5.1 2.5 0.09 0.44 6
4018S-20 0.30 15.0 0.11 42.3 28.2 0.09 0.44 6
1.57"
39.9 mm
4018M-03 0.40 22.3 0.16 30.0 28.8 0.13 0.48 6
4018M-08 0.80 22.3 0.16 8.5 7.0 0.13 0.48 6
1.88"
47.8 mm
4018L-01 0.80 30.0 0.21 7.5 6.0 0.20 0.66 6
4018L-03 1.20 30.0 0.21 3.3 3.1 0.20 0.66 6
• Please complete our application data sheet for different windings.
• 6 wire motors are reported as unipolar ratings.
• Power supply voltage can be any value as long as the driver output current is controlled at the rated current.
• Call Lin Engineering for additional bipolar, Unipolar, or T-connection torque curves.
• Performance, use, and appearance specifications of the products listed here are subject to change without notice
• Motor currents are listed in RMS (Amp/Phase and RMS are the same value. Peak Current is 1.4 times the Amp/Phase or RMS value).
Can't find the motor performance you're looking for?  Click here to Design your motor in 3 easy steps. 
 
 
Step Motor Selection Made Easy
 
Super Torque Motor
Model 4118
.................................
   

 
 
 
Lin Engineering can design and manufactures stepper motors specific to your environmental, mechanical, and dimensional requirements for step motors. click on image to view our options
Shaft
..Modifications
Custom
..Housings

High
..Temperature/
..Vacuum
..Environments

Added
..Value
..Assemblies
Lead Wires
..& Cables
General
..Options
 

Lin Engineering step motors are available with either 2-coil Bipolar, or 4-coil Unipolar windings. Bipolar motors have 4 leads, while unipolar motors have 6 leads. Additionally, some stepper motors are designed with 8 leads, so they may be connected in a variety of ways.
Click here to view our connection instruction

 

Address: 1990 Russell Avenue , Santa Clara, CA 95054
Tel: (408) 919-0200 Fax: (408) 919-0201
Email: sales@linengineering.com, techsupport@linengineering.com

To find your local sales office, click here

 
Frame Size 17-Step size 1.8°-Model Number 4018

3D MODEL IN STEP FILE FORMAT (.STP)
-3D-Model Number 4018F (Single Shaft)
 -3D-Model Number 4018F (Double Shaft)
-3D-Model Number 4018L (Single Shaft)
-3D-Model Number 4018L (Double Shaft)
-3D-Model Number 4018S (Single Shaft)
-3D-Model Number 4018S (Double Shaft)
-3D-Model Number 4018M (Single Shaft)
-3D-Model Number 4018M (Double Shaft)
-3D-Model Number 4018X (Single Shaft)
-3D-Model Number 4018X (Double Shaft)

Driver
R208
2A, 8xstep
Driver/ Controller
R164
1.5A, 64xstep
Power Supply
PW100
24 or 48V (100W)
   
Driver
R325
3A, 256xstep
Driver/ Controller
R364
3-Axis
Power Supply
PW150
24 or 48V (150W)
   
 
Driver/ Controller
R101
2.5A, 8xstep
 
     

Copyright© Lin Engineering 2005. All Right Reserved . 1990 Russell Avenue, Santa Clara, CA 95054. Tel:408-919-0200. Fax:408-919-0201 email: sales@linengineering.com

| step motor | step motors | stepper motor | stepper motors |