LinFinity Linear Actuator Systems
The LinFinity Linear Actuator is a system engineered to eliminate issues that plague ordinary linear actuators:
• Excessive friction and heat build up
• Too much noise
• Degrading accuracy
• Short life span
• Required maintenance
The LinFinity Linear Actuator system is composed of a patent pending LinFinity Nut, a highly polished leadscrew, and a Lin Engineering stepper motor.
1. Lin Finity Nut
The LinFinity Nut is an internally lubricated anti-backlash nut proven to last over 12 million inches of travel in a typical application without maintenance.
The patent pending design incorporates an internal grease reservoir which distributes a consistent layer of grease throughout the entire surface of the leadscrew as the nut travels. The internal reservoir maintains hydrodynamic lubrication throughout the life of the product, which drastically reduces friction and thus increases the performance and longevity of the product.
Ordinary externally lubricated anti-backlash nuts act as a wiper: instead of distributing the grease evenly, they tend to push the grease out to the edges of the screw. This results in the grease drying out and ultimately leads to product failure.
EASY TO INSTALL AND ADJUST
Once the nut is installed on the lead screw the internal grease reservoir can be filled from the outside.
Spring washer holds the tension ensuring zero backlash is maintained throughout the life of the product.
The torque can be adjusted without removing the nut from the leadscrew. The anti-backlash tension can be adjusted simply by rotating the black nut against the spring washer to obtain the desired drag torque.
Reduces Heat Build Up
Less friction means less heat is being generated. LinFinity reduces heat build up by at least 20% compared to the closest competing design. Heat leads to premature failure.
Ordinary externally lubricated nuts
tend to increase friction throughout
the life of the product. Friction causes
excessive noise. LinFinity maintains
low friction throughout the lifespan and
does not generate more noise with age.
Lower heat and reduced friction along with even distribution of grease result in the overall life of the Linear Actuator system to increase.
PTFE coated leadscrews are often used to reduce friction. This function well in many applications, however, PTFE coating may not be suitable for certain applications which demand constant cycling.
We’ve experienced noticeable coating damage while constantly cycling an anti-backlash nut over a PTFE coated leadscrew. The damage often occurs within one million inches of travel. And once the coating is compromised, further damage occurs at accelerated rate. This occurs because the metal surface of the leadscrew has to be roughened to accept the PTFE coating. And when the coating fails, the anti-backlash nut is exposed to the rough surface of the metal, which in turn accelerates the wear of the nut.
The LinFinity Nut glides on a highly polished leadscrew on a thin layer of grease. This makes LinFinity Nut suitable for even the most demanding applications. Polished leadscrews lets us achieve over 12 million inches of travel with no maintenance required; more than any other product we’ve tested.
Picture of PTFE coating damage
3. Choose Actuator Style
Get the exact stepper motor linear actuator system that you need to solve your motion control problems.
It’s as easy as 1 2 3: choose your motor, choose your screw, and choose your nut. Select your stepper motor linear actuator type:
Sign up to our mailing list, and receive a whitepaper on Selecting The Right Linear Actuator To Improve Your Operating Efficiency instantly.
Selecting the appropriate linear actuator can be quite the ordeal – and selecting the wrong one could dramatically reduce the efficiency of your application, and shorten its lifespan. Learn about the different types of linear actuators and how to select the right one.
This whitepaper is available for your download below. Just enter your first name, email address, and your industry, and we’ll email the download link immediately.
You'll enjoy more goodies too.
If you're a fan of motion control, then you'll get a lot of value by singing up. Our list is geared towards Design Engineers who enjoy learning new things about the industry. Therefore, every once in a while, we'll email you more goodies which we think you'll enjoy. These things includes whitepapers, relevant articles, design guides, etc.
And remember. If you think that the information is not valuable or relevent to you, then you can always unsubscribe at any time. You have nothing to lose.
We will not sell your information, or SPAM you with useless information. Ever!