SilverPak17C_D_Encoder_Product_Image

Silverpak 17CE

INTEGRATED MOTOR + DRIVER + CONTROLLER + ENCODER

SilverPak17C_D_Encoder_Product_Image
Features and Benefits:
  • NEMA 17, 1.8º Bipolar Step Motor
  • Operates from +12 to 40 VDC
  • Phase current ranges from 0.1 to 2.0 Amps Peak
  • Step Resolutions of full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
  • Two Digital I/O's and two dedicated Inputs
  • Execution Halt Pending a Switch
  • Pre-wired for Opto Switch Inputs
  • Homes to an Opto Sensor
  • Fully programmable ramps and speeds
  • Software selectable Hold and Move currents
  • Stand Alone Operation with no connection to PC
  • Stores up to 16 different programs at once with 4 kBytes of memory
  • Up to 84.8 oz-in of Holding Torque

SilverPak CE comes with a built-in Encoder *

  • Max 1250 cycles per revolution (CPR)
  • Max 1600 pulses per revolution (PPR) (quadreture)
  • 2 channel quadrature TTL squarewave outputs
  • Optional index (3rd channel)

    *The Silverpak CE is not a closed loop control.  A separate controller must be used in order to read from the encoder.


 

Each Silverpak comes with the following cable (Lin part number 090-00044):

DB-9 cable with white 3-pin connector

DB9_Cable
The Designer’s Kit (sold separately) enables first time users to become well acquainted with the options of our Silverpak C

RS485 Designer’s Kit (Lin part number: RS232KIT) Includes:

  • RS485 to RS232 Converter Card
  • An Optical Sensor
  • Red Switch Push Button
  • 3-Pin Cable
RS485-232_Design_Kit

USB485 Designer’s Kit (Lin p/n: USBKIT) Includes:

  • USB485 Converter Card
  • An Optical Sensor
  • Red Switch Push Button
  • 6 foot USB Cable
USB_Design_Kit

SilverPak C has a NEMA Size 17 Step Motor, and comes in three different sizes:

PART NUMBERMOTOR BODY LENGTHHOLDING TORQUE
4118S 2.69" (6.83cm)30 oz-in (21.19N-cm)
4118M 2.92" (7.42cm) 45 oz-in (31.79 N-cm)
4118L 3.24" (8.23cm) 85 oz-in (60.03 N-cm)
DB-9 Connector for Control (A) Motor Front Shaft Extension Length (B) Standard length is 0.94” (23.9mm) Motor Shaft Diameter (C): Standard shaft diameter is 0.1968” (5 mm) Overall Body Length Motor body length is available in various lengths (D): . Model 4118S 2.69″ (6.83cm) . Model 4118M 2.92″ (7.42cm) . Model 4118L 3.24″ (8.23cm) Encoder (E)
SilverPak17CE_DE_dimensions
CE-4118S-01 Torque Curves
For more winding options, please click here
PIN NUMBERCOLOR (#26 AWG Lead)FUNCTIONINPUT
1Red+V (Main Power In)
2BlackI/O1
3BrownRS485B (-)
4Black/WhiteRS485A (+)
5OrangeSwitch Closure to GND (IN) 4
6GreenGND (-V of main pwr in)
7WhiteOpto Sensor Phototransistor (IN) 3
8BlueI/O2
9YellowOpto Sensor LED (Power Out)
* Inputs are labeled 1, 2,3 and 4 for programming the ‘halt’ and ‘skip’ Commands. See Silverpak CE manual for more information.
The DB-9 provides power and controls DB9_Connector