 |
Integrated Motor Controller+Driver+Encoder/ SilverPak 17CE |
| |
 |
• NEMA 17, 1.8º Bipolar Step Motor
• Operates from +12 to 40 VDC
• Phase current ranges from 0.1 to 2.0 Amps Peak
• Step Resolutions of 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• Two Digital I/O's and two dedicated Inputs
• Execution Halt Pending a Switch
• Pre-wired for Opto Switch Inputs
• Homes to an Opto Sensor
• Fully programmable ramps and speeds
• Software selectable Hold and Move currents
• Stand Alone Operation with no connection to PC
• Stores up to 16 different programs at once with 4 kBytes of memory
• Up to 84.8 oz-in of Holding Torque
|
|
| |
 |
| |
|
| |
 |
| |
|
| |
 |
| |
SilverPak CE comes with a built-in Encoder*
Max 1250 cycles per revolution (CPR)
Max 1600 pulses per revolution (PPR) (quadreture)
2 channel quadrature TTL squarewave outputs
Optional index (3rd channel)
*The Silverpak CE is not a closed loop control. A separate controller must be used in order to read from the encoder.
The Designer's Kit (sold separately) enables first time users to become well acquainted with the options of our Silverpak C
RS485 Designer's Kit (Lin part number: 083-00004) Includes:
RS485 to RS232 Converter Card
An Optical Sensor
Red Switch Push Button
Extra wiring for I/O
USB485 Designer's Kit (Lin part number: 083-00026) Includes:
USB485 Converter Card
An Optical Sensor
Red Switch Push Button
Extra wiring for I/O
SilverPak D has a NEMA Size 17 Step Motor, and comes in three different sizes:
| Part # |
Motor Body Length |
Holding Torque |
| 4118S |
2.69" (6.83cm) |
30 oz-in (21.19N-cm) |
| 4118M |
2.92" (7.42cm) |
45 oz-in (31.79 N-cm) |
| 4118L |
3.24" (8.23cm) |
85 oz-in (60.03 N-cm) |
|
| |
 |
| |
• INPUT VOLTAGE:+12 to 40 VDC
• DRIVE CURRENT(PER PHASE):0.1 to 2.0 Amps Peak
• ISOLATED INPUTS:I/O, Switch Closure to Ground, Opto Phototransistor
• STEP FREQUENCY (MAX): 16.7 kHz
• STEPS PER REVOLUTION (1.8º MOTOR): 400, 800, 1600, 3200, 6400, 12800, 25600, 5120 |
| |
 |
| |
A. DB-9 Connector for Controls
B. Motor Front Shaft Extension Length
Standard Length is 0.94" (23.9mm)
C. Motor Shaft Diameter
Standard is 0.197" (5 mm)
D. Overall Body Length
Small: 2.69" (6.83cm)
Med: 2.92" (7.42cm)
Large: 3.24" (8.23cm)
E. Connector for Encoder |
 |
|
| |
 |
| |
Pin Number |
Color
(#26 AWG Lead) |
Function |
Input * |
1 |
Red |
+V (Main power In) |
|
2 |
Black |
I/O |
1 |
3 |
Brown |
RS485B (-) |
|
4 |
Black/White |
RS485A (+) |
|
5 |
Orange |
Swich Closure to GND (IN) |
4 |
6 |
Green |
GND (-V of main pwr in) |
|
7 |
White |
Opto Sensor Phototransistor (IN) |
3 |
8 |
Blue |
I/O |
2 |
9 |
Yellow |
Opto Sensor LED (Power Out) |
|
|
 The DB-9 provides power and controls
|
| * Inputs are labeled 1, 2,3 and 4 for programming the 'halt' and 'skip' Commands. See Silverpak CE manual for more information. |
|
| |
|
| |
|
| |
|
| |
Address: 1990 Russell Avenue , Santa Clara, CA 95054
Tel: (408) 919-0200 Fax: (408) 919-0201
Email: sales@linengineering.com, techsupport@linengineering.com
To find your local sales office, click here
|
| |
 |
| |
|
| |
|
| |
 |
Power Supply
PW100
24 or 48V (100W) |
|
|
Power Supply
PW150
24 or 48V (150W) |
|
|
|
|
|
| |
|
