Lin Engineering - Step Motor Specialists

FRAME SIZE 34 | Step Size 1.8°

8718
HIGH TORQUE MOTOR

• High Torque
• High Step Accuracy
• High Resolution
• Custom Windings Available (No addtional cost)

Other Models
Specifications
Dimensions
Torque Curves
Download
Customize
Accessories

8618
STANDAR MOTOR
....................................................

• NEMA Size 34 Mounting
• Cost Effective
• Custom Windings Available (No addtional cost)
• Inquire about RoHS versions

BIPOLAR


2.64" 67.1 mm	8718S-01S	1.40	434.0	3.06	4.7	26.4	7.66	3.85	4
	8718S-01P	2.80	434.0	3.06	1.2	6.6	7.66	3.85	4
	8718S-03S	2.10	434.0	3.06	2.0	14.0	7.66	3.85	4
	8718S-03P	4.20	434.0	3.06	0.5	3.5	7.66	3.85	4
	8718S-05S	3.15	434.0	3.06	1.0	6.1	7.66	3.85	4
	8718S-05P	6.30	434.0	3.06	0.3	1.5	7.66	3.85	4

3.82" 97 mm	8718M-04S	1.40	861.0	6.08	6.7	64.5	14.80	5.94	4
	8718M-04P	2.80	861.0	6.08	1.7	16.1	14.80	5.94	4
	8718M-06S	2.10	861.0	6.08	2.5	23.6	14.80	5.94	4
	8718M-06P	4.20	861.0	6.08	0.6	5.9	14.80	5.94	4
	8718M-16S	3.15	861.0	6.08	1.2	8.3	14.80	5.94	4
	8718M-16P	6.30	861.0	6.08	0.3	2.1	14.80	5.94	4

5.00" 127 mm	8718L-02S	1.40	1288.0	9.10	7.5	78.1	21.90	8.44	4
	8718L-02P	2.80	1288.0	9.10	1.9	19.5	21.90	8.44	4
	8718L-04S	3.15	1288.0	9.10	1.9	16.6	21.90	8.44	4
	8718L-04P	6.30	1288.0	9.10	0.5	4.1	21.90	8.44	4
	8718L-08S	3.85	1288.0	9.10	1.2	10.8	21.90	8.44	4
	8718L-08P	7.70	1288.0	9.10	0.3	2.7	21.90	8.44	4

UNIPOLAR


2.64" 67.1 mm	8718S-01	2.00	310.0	2.19	2.3	6.6	7.66	3.85	8
	8718S-03	3.00	310.0	2.19	1.0	3.5	7.66	3.85	8
	8718S-05	4.50	310.0	2.19	0.5	1.5	7.66	3.85	8

3.82" 97 mm	8718M-04	2.00	615.0	4.34	3.3	16.1	14.80	5.94	8
	8718M-06	3.00	615.0	4.34	1.3	5.9	14.80	5.94	8
	8718M-16	4.50	615.0	4.34	0.6	2.1	14.80	5.94	8

5.00" 127 mm	8718L-02	2.00	920.0	6.50	3.8	19.5	21.90	8.44	8
	8718L-04	4.50	920.0	6.50	1.0	4.1	21.90	8.44	8
	8718L-08	5.50	920.0	6.50	0.6	2.7	21.90	8.44	8

• Please complete our application data sheet for different windings.

• 6 wire motors are reported as unipolar ratings.

• Power supply voltage can be any value as long as the driver output current is controlled at the rated current.

• Call Lin Engineering for additional bipolar, Unipolar, or T-connection torque curves.

• Performance, use, and appearance specifications of the products listed here are subject to change without notice
• Motor currents are listed in RMS (Amp/Phase and RMS are the same value. Peak Current is 1.4 times the Amp/Phase or RMS value).

Click here to Design your motor in 3 easy steps.

Click on dimension to zoom in

SINGLE SHAFT

MODEL	MOTOR LENGTH ("A")
MODEL	Inches	mm
8718S	2.64"	67.1 mm
8718M	3.82"	97 mm
8718L	5.00"	127 mm

Click on torque curve to zoom in

Frame Size 34-Step size 1.8°-Model Number 8718

Step Motor Start-Up Guide

3D MODEL IN STEP FILE FORMAT (.STP)
3D-Model Number 8718S
3D-Model Number 8718M
3D-Model Number 8718L

R325 with Pole Damping Technology™
MICROSTEPPING DRIVER
....................................................

• Operates from +15 to 48 VDC
• Phase current from 0.3 to 3.0 Amps Peak
• Step Resolutions from Full to 256 microstepping
•Hold current reduction capability with adjustable current and timeout settings

POWER SUPPLY
24 OR 48V (100W/150W)
....................................................

• Universal Input
• High Efficiency
• Built in PFC Circuit
• 3000 V Isolation
• Single Outputs

R701/ R710
MICROSTEPPING DRIVER
....................................................

• Bipolar Step Motor Driver
• Operates from 24 to 80 VDC
• Current Ranges from 1-7 Amps and 0.3-2 Amps
•10 Microstepping Driver
•Low Cost Driver

Do You Also Need