Lin Engineering - Step Motor Specialists

FRAME SIZE 17 | Step Size 1.8°

4118 Integral Connector
SUPER TORQUE MOTOR

• NEMA Size 17 Mounting
• Cost Effective
• Custom winding available (No additional cost)
• Inquire about RoHS version

Other Models
Specifications
Dimensions
Torque Curves
Download
Customize
Accessories

4018
STANDARD TORQUE MOTOR
....................................................

• NEMA Size 17 Mounting
• Cost Effective
• Custom Windings Available (No addtional cost)
• Inquire about RoHS versions

4118
SUPER TORQUE MOTOR
....................................................

• NEMA Size 17 Mounting
• Cost Effective
• Custom Windings Available (No addtional cost)
• Inquire about RoHS versions

4418
XTREME TORQUE MOTOR
....................................................

• NEMA Size 17 Mounting
•Up to 35% more torque in a smaller package
• Custom Windings Available (No addtional cost)
• Inquire about RoHS versions

4518
SIGNATURE SERIES MOTOR
....................................................

• NEMA Size 17 Mounting
• Cost Effective
• Patent Pending Signature Series Technology
• Smooth and Accurate Motion
• Custom Windings Available (No addtional cost)
• Inquire about RoHS versions

BIPOLAR


1.34" 34.0 mm	4118S-02	1.30	45.0	0.32	2.8	3.6	0.18	0.40	4
	4118S-04S	0.67	45.0	0.32	9.9	12.5	0.18	0.40	4
	4118S-04P	1.34	45.0	0.32	2.5	3.1	0.18	0.40	4
	4118S-09	0.90	45.0	0.32	5.3	6.7	0.18	0.40	4

1.58" 40.1 mm	4118M-01	1.70	63.0	0.44	1.5	3.0	0.28	0.60	4
	4118M-06S	0.70	63.0	0.44	10.8	21.8	0.28	0.60	4
	4118M-06P	1.40	63.0	0.44	2.7	5.5	0.28	0.60	4

1.89" 48.0 mm	4118L-01	2.00	83.0	0.59	1.4	2.7	0.37	0.70	4
	4118L-07S	1.05	83.0	0.59	5.2	9.4	0.37	0.70	4
	4118L-07P	2.10	83.0	0.59	1.3	2.3	0.37	0.70	4

2.34" 59.9 mm	4118C-01	2.0	125	0.89	2.0	3.3	0.56	0.90	4

UNIPOLAR


1.34" 34.0 mm	4118S-04	0.95	30.0	0.21	5.0	3.1	0.18	0.40	6

1.58" 40.1 mm	4118M-06	1.00	45.0	0.32	5.4	5.5	0.28	0.60	6

1.89" 48.0 mm	4118L-07	1.50	65.0	0.46	2.6	2.3	0.37	0.70	6
1.89" 48.0 mm	4118L-25	0.45	65.0	0.46	25.0	17.4	0.37	0.70	6

• Please complete our application data sheet for different windings.

• 6 wire motors are reported as unipolar ratings.

• Power supply voltage can be any value as long as the driver output current is controlled at the rated current.

• Call Lin Engineering for additional bipolar, Unipolar, or T-connection torque curves.

• Performance, use, and appearance specifications of the products listed here are subject to change without notice
• Motor currents are listed in RMS (Amp/Phase and RMS are the same value. Peak Current is 1.4 times the Amp/Phase or RMS value).

Click here to Design your motor in 3 easy steps.

For easier installation, the 4118 series step motors can be integrated with a Molex connector. We call this an integral connector.
Please specify an integral connector when ordering. Standard motors are shipped with 12" long lead wires.

Cables (sold separately):

Model Number	Cable Length	Wire Gauge
090-00218	24"	AWG 22
090-00219	36"	AWG 22

Connector housing	51103-0600 (MOLEX, Positive lock type) or 51102-0600 (MOLEX, Friction lock type)
Contact	50351-8100 (MOLEX)
Crimp tool	57295-5000 (MOLEX)

Click on dimension to zoom in

SINGLE SHAFT

MODEL	MOTOR LENGTH ("A")
MODEL	Inches	mm
4118S	1.34"	34.0 mm
4118M	1.58"	40.1 mm
4118L	1.89"	48.0 mm
4018C	2.34"	59.9 mm

Click on torque curves to zoom in

Frame Size 17-Step size 1.8°-Model Number 4118

Step Motor Start-Up Guide

3D MODEL IN STEP FILE FORMAT (.STP)

-3D-Model Number 4118S (Single Shaft)
-3D-Model Number 4118S (Double Shaft)
-3D-Model Number 4118M (Single Shaft)
-3D-Model Number 4118M (Double Shaft)
-3D-Model Number 4118L (Single Shaft)
-3D-Model Number 4118L (Double Shaft)
-3D-Model Number 4118C (Single Shaft)
-3D-Model Number 4118C (Double Shaft)

R208
MICROSTEPPING DRIVER
....................................................

• Bipolar Step Motor Driver
• Operates from +12 to 24 VDC
• Phase current ranges from 0.35 to 2.0 Amps Peak
•Selectable Step Resolution from Full, Half, 1/4, and 1/8 microsteps

R256
SINGLE AXIS DRIVER/CONTROLLER
....................................................

• Input Voltage of +12 to 40 VDC
• Phase Current Ranges from 0.2 to 2.0 Amps Peak
• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• Fully Programmable Ramps and Speeds

R325 with Pole Damping Technology™
MICROSTEPPING DRIVER
....................................................

• Operates from +15 to 48 VDC
• Phase current from 0.3 to 3.0 Amps Peak
• Step Resolutions from Full to 256 microstepping
•Hold current reduction capability with adjustable current and timeout settings

TMCM-310
3-AXIS-DRIVER/ CONTROLLER
....................................................

• Microstepping: Up to 16x
• Current: 0.3 - 1.5 Amps
• Full step frequencies up to 20kHz

POWER SUPPLY
24 OR 48V (100W/150W)
....................................................

• Universal Input
• High Efficiency
• Built in PFC Circuit
• 3000 V Isolation
• Single Outputs

Do You Also Need