Lin Engineering - Step Motor Specialists

FRAME SIZE 14 | Step Size 1.8°

3518
STANDARD MOTOR

•Ideal for Limited Mounting Space
• Custom winding available (No additional cost)
• Inquire about RoHS version

Other Models
Specifications
Dimensions
Torque Curves
Download
Customize
Accessories

3518
STANDARD MOTOR
WITH INTEGRATED CONNECTOR
....................................................

•Ideal for Limited Mounting Space
• Custom winding available (No additional cost)
• Inquire about RoHS version

BIPOLAR


1.02" 26 mm	3518X-04	0.45	7.5	0.05	3.8	2.7	0.06	0.25	4
1.02" 26 mm	3518X-08	0.35	7.5	0.05	8.5	5.8	0.06	0.25	4
1.34" 34 mm	3518M-07	Please click here for more information

UNIPOLAR


1.02" 26 mm	3518X-12	0.30	5.5	0.04	12.0	4.4	0.06	0.25	6

• Please complete our application data sheet for different windings.

• 6 wire motors are reported as unipolar ratings.

• Power supply voltage can be any value as long as the driver output current is controlled at the rated current.

• Call Lin Engineering for additional bipolar, Unipolar, or T-connection torque curves.

• Performance, use, and appearance specifications of the products listed here are subject to change without notice
• Motor currents are listed in RMS (Amp/Phase and RMS are the same value. Peak Current is 1.4 times the Amp/Phase or RMS value).

Click here to Design your motor in 3 easy steps.

Click on drawing to zoom in

MODEL	MOTOR LENGTH ("A")
MODEL	Inches	mm
3518X	1.02"	26 mm

Click on torque curve to zoom in

Frame Size 14-Step size 1.8°-Model Number 3518

Step Motor Start-Up Guide

3D MODEL IN STEP FILE FORMAT (.STP)

3D-Model Number 3518X (Single Shaft)
3D-Model Number 3518X (Double Shaft)

R208
MICROSTEPPING DRIVER
....................................................

• Bipolar Step Motor Driver
• Operates from +12 to 24 VDC
• Phase current ranges from 0.35 to 2.0 Amps Peak
•Selectable Step Resolution from Full, Half, 1/4, and 1/8 microsteps

R256
SINGLE AXIS DRIVER/CONTROLLER
....................................................

• Input Voltage of +12 to 40 VDC
• Phase Current Ranges from 0.2 to 2.0 Amps Peak
• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• Fully Programmable Ramps and Speeds

TMCM-310
3-AXIS-DRIVER/ CONTROLLER
....................................................

• Microstepping: Up to 16x
• Current: 0.3 - 1.5 Amps
• Full step frequencies up to 20kHz

POWER SUPPLY
24 OR 48V (100W/150W)
....................................................

• Universal Input
• High Efficiency
• Built in PFC Circuit
• 3000 V Isolation
• Single Outputs

R325
MICROSTEPPING DRIVER
....................................................

• Operates from +15 to 48 VDC
• Phase current from 0.3 to 3.0 Amps Peak
•Step Resolutions from Full to 256 microstepping

Do You Also Need