Step Motors
Integrated Motors
BLDC Motors
Size 23
Size 17
Drivers / Controllers
Stepper Drivers
Stepper Drivers/Controllers
BLDC Drivers
Power Supplies
Optical Encoders
Planetary Gears
Accessories
Additional Info
 
  Custom Design
  DLINE
  Take Advantage of Our Value Added Services
   
  DLINE
 

Lin Engineering can design and manufacture motors specific to your environmental,
mechanical, and dimensional requirements.

 

 
  • Reduce Costs
  • Save Time
  • Better Supply Chain Control
  • Lin Quality Standards for Every Component

  DLINE
LIN CUSTOM DESIGN
   
 
DEMO VIDEO

 

 

 

 

 

 

 

 

744
BG MULTIPLE SHAFT OPTIONS
 
Multiple Flat Options
       
 
Slotted Shaft Options
   
 
Cross Drilled Shaft   Extended
Shaft
  Extended
Shaft
     
 
 
Helical Cut
 
 
 
Press Fit Gear & Pulley
       
             

 

 

 

 

 

744
BG CUSTOM HOUSINGS

Lin Engineering can design and manufacture motors specific to your environmental, mechanical, and dimensional requirements.

Clean Room Environment
Stainless Steel
Anodize Finish
Assembly Integration

 

 


744
BG BEARING & LUBRICANTS

NEMA 11, 1.8 degree Motor
Up to 16 oz-in holding torque
Vacuum Ratings from 10 Torr to 10Torr

 

 

The vacuum rated motor measures a mere 1.1” square and is available in three lengths: the 211-13 is 1.24”, the 211-18 is 1.75” and the 211-20 is 1.99.” In order to make these small but powerful motors vacuum rated, Lin Engineering ensures that all of the special handling and parts necessary are used in the manufacturing process. First of all, all paint and oils are removed from the motor. Next, high temperature windings are utilized as well as Teflon leads. Lastly, depending on the rating of the vacuum environment, either no-lube stainless steel bearings or special-lube stainless steel bearings are used. During the entire manufacturing process, latex gloves are worn to ensure that no residue from human touch is left behind on the motors. All of the above special parts and handling ensure that limited outgassing and contamination will occur.

NEMA 17 and 23 vacuum motors are also available, please contact Lin Engineering for more information.
Note: click here motor specifications.


744
BG IP65 RATED MOTORS
Available in 1.8 degree NEMA 17 & 23
Protected against dust, low pressure jets of water
Better Protection from Damaging Environmental Elements
FDA Approved


The IP65 Series of motors are totally protected against dust as well as guaranteed to withstand low pressure jets of water sprayed from all directions from a distance of 3 meters. These jets of water can carry pressure of up to 30 kPa from all directions at a rate of 12.5 l/min for the duration of 3 minutes. In addition to being protected from environmental factors, the coating on our IP65 Series motors is also FDA approved. Standard motor operating temperature range is -20°C to 50°C .  Motor case temp should not exceed 90°C.

For smaller or larger IP65 motor, please contact sales@linengineering.com or call (408) 919-0200

744
BG IPX7 RATED MOTORS
bullet Available in 1.8 Degree NEMA 23
bullet Protected against dust; Submersible in depths of 15cm to 1m
bullet Better protection from Damaging Environmental Elements
bullet FDA Approved
IPX7  

The IPX7 series of motors are completely protected against dust; they are also made to withstand immersion into liquids in depths of 15cm to 1m for time periods of up to 30 minutes.   In addition to being protected from environmental factors, the coating on our IPX7 Series motors is also FDA approved.  The Lin Engineering 5718 series step motors are now available with an IPX7 rating.  The 5718 is a 1.8, NEMA size 23 stepper motor that has a MAX body length of 2.25”.  This motor is available in three stack lengths is capable of producing holding torque up to 294 oz-in.  Unipolar and bipolar windings are available to allow for the torque and speed required to accommodate your application.

For smaller or larger IPX7 rated motors, please contact sales@linengineering.com
or call (408) 919-0200.

 

 

744
BG HIGH TEMPERATURE/ VACUUM ENVIRONMENTS
Dry Bearings
Special Lube Stainless Steel Bearings
Non-Outgasing Lubricants


744
BG LEAD WIRES & CABLES

 

Leadwires & Cables

 

 


744
BG ADDED VALUE ASSEMBLIES
Added Value Assemblies

744
BG CUSTOM WINDING
 

Custom Winding

 

 
Click Here