Step Motors
Integrated Motors
BLDC Motors
Size 23
Size 17
Drivers / Controllers
Stepper Drivers
Stepper Drivers/Controllers
BLDC Drivers
Power Supplies
Optical Encoders
Planetary Gears
Accessories
Additional Info
ACCESSORIES
 
Damper Motor  | NEMA 17 | Motor Resonance reduction

NEMA 17 DAMPERS

• Can help reduce resonance
• Durable
• Can be Easily Mounted


 
  • Other Models
  • Specifications
  • Dimensions
  • Download
  • Video Demo
sq  
  OTHER MODELS AVAILABLE
   
 
4018 Standard Motor sq

NEMA 23 DAMPERS
....................................................

• Can help reduce resonance
• Durable
• Can be Easily Mounted



sq  
     
     
 

 

 

 

 

 

 
 
DAMPER SPECIFICATIONS

As motors step, inertia makes the rotor oscillate about its new position (the motor’s settling time).  This natural back and forth movement might sometimes contribute to the erratic movement of motors.  Adding a Lin damper to the step motor’s shaft translates into smaller oscillations and thus, smoother motion.  This reduced step response time can ultimately result in much improved motor performance.


Below is a comparison of one motor’s settling time with and without the use of a damper. 


Without Damper = 0.5 Seconds
With Damper = 0.05 Seconds
That’s up to 10 times less resonance when you use a damper from Lin Engineering

 
dline
Nema 23 with no damper
  dline
   
 
Wet/ Dry Operation
Inertia
oz-in2 (gm-cm2)
Mounting
Shaft Size
Dry
0.064 oz-in2(11.71 gm-cm2)
Set Screw
.1965 (5mm)

 

 

 

   
DIMENSIONS
   
 

Damper Dimensions

 

   
 
   
   
   
   
   
   
   
   

DOWNLOAD

 
Coming soon

   
   
   
   
   

 

  VIDEO DEMO
 
 


  View All Lin video
   
   
 
  dline
 

 

 

 

 

 

 

 

 

 

 

   
sqDOWNLOAD
   pdf RS485 to RS232 Converter Card Manual
 
 
 
  Recommended For
 
SilverPak 17C Integrated Motor+Controller
SilverPak 17C
Integrated
Motor+Controller+StallGuard

SilverPak 17T
Integrated
Motor+Driver

SilverPak 23C
   
SilverPak 17CE Integrated Motor+Controller+Encoder
SilverPak 17CE
Silvepak 23CE Integrated
Motor+Controller
+Encoder
SilverPak 23CE
       
  dline
 
 
4018 Standard Motor sq

SINGLE AXIS CONTROLLER+ DRIVER
R356
....................................................

• Input Voltage of +12 to 40 VDC
• Phase Current Ranges from 0.3 to 3.0 Amps Peak
• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• RS485 Communication with Optional Converter
Cards Available



sq
4118 Super Torque Motor sq

R256
SINGLE AXIS DRIVER/CONTROLLER
....................................................

• Input Voltage of +12 to 40 VDC
• Phase Current Ranges from 0.2 to 2.0 Amps Peak
• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• Fully Programmable Ramps and Speeds



4118 Super Torque Motor sq

MICROSTEPPING DRIVER
R325
....................................................

• Operates from +15 to 48 VDC
• Phase current from 0.3 to 3.0 Amps Peak
• Step Resolutions from Full to 256 microstepping
• Hold current reduction capability with adjustable current and timeout settings
• Three optically isolated control inputs and one optically isolated control output
• Pole Damping™ Technology



   
 
     
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
  Do You Also Need
   
Do You Also Need

sq