INTEGRATED MOTOR + DRIVER + CONTROLLER SILVERPAK 23C
• NEMA 23, 1.8° Bipolar Step Motor
• Up to 294 oz-in of holding torque
• Input voltage of +12 to 40 VDC
• Phase current ranges from 0.3 to of 3.0 Amps Peak
• Step Resolutions of full step, 1/2, 1/4, 1/8, 1/16, 1/32,
1/64, 1/128, 1/256
• RS485 communication with optional converter cards available
• 4 user configurable digital I/O’s
• 2 dedicated inputs:
• 1 optical sensor for homing
• 1 switch closure to ground
• Fully programmable ramps and speeds
• Software selectable Hold and Move currents
• Stand Alone Operation with no connection to PC
• Stores up to 16 different programs at once with 4 kBytes of memory
• 3 stack lengths available
RS485 Designer's Kit (Lin part number: RS232KIT) Includes:
RS485 to RS232 Converter Card
An Optical Sensor
Red Switch Push Button
3-Pin Cable
USB485 Designer's Kit (Lin p/n: USBKIT) Includes:
• USB485 Converter Card
• An Optical Sensor
• Red Switch Push Button
• 6 foot USB Cable
Motor Front Shaft Extension Length
Standard length is 0.81”.
Motor Shaft Diameter
Standard shaft diameter is 0.25”.
Overall Body Length
Motor body length is available in various lengths (Dimension A):
CO-5718X: 2.94” (7.46 cm)
CO-5718M: 3.45” (8.76 cm)
CO-5718L: 4.33” (11 cm)
Click on drawing to zoom in
steps/sec
