Lin Engineering - Step Motor Specialists

ACCESSORIES |

NEMA 23 DAMPERS

• Can help reduce resonance
• Durable
• Can be Easily Mounted

Other Models
Specifications
Dimensions
Download
Video Demo

NEMA 17 DAMPERS
....................................................

• Can help reduce resonance
• Durable
• Can be Easily Mounted


As motors step, inertia makes the rotor oscillate about its new position (the motor’s settling time). This natural back and forth movement might sometimes contribute to the erratic movement of motors. Adding a Lin damper to the step motor’s shaft translates into smaller oscillations and thus, smoother motion. This reduced step response time can ultimately result in much improved motor performance. Below is a comparison of one motor’s settling time with and without the use of a damper. Without Damper = 0.15 Seconds With Damper = 0.036 Seconds That’s up to 4 times less resonance when you use a damper from Lin Engineering

Wet/ Dry Operation	Inertia oz-in (gm-cm)	Mounting	Shaft Size
Dry	0.36 oz-in(65.84 gm-cm)	Set Screw (M4)	.250" (6.35mm)



Coming soon

View video large size (720x480)

View All Lin video



	RS485 to RS232 Converter Card Manual

	Integrated Motor+Controller SilverPak 17C		Integrated Motor+Controller+StallGuard SilverPak 17T		Integrated Motor+Driver SilverPak 23C
	Integrated Motor+Controller+Encoder SilverPak 17CE		Integrated Motor+Controller+Encoder SilverPak 23CE

SINGLE AXIS CONTROLLER+ DRIVER
R356
....................................................

• Input Voltage of +12 to 40 VDC
• Phase Current Ranges from 0.3 to 3.0 Amps Peak
• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• RS485 Communication with Optional Converter
Cards Available

R256
SINGLE AXIS DRIVER/CONTROLLER
....................................................

• Input Voltage of +12 to 40 VDC
• Phase Current Ranges from 0.2 to 2.0 Amps Peak
• Full step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
• Fully Programmable Ramps and Speeds

MICROSTEPPING DRIVER
R325
....................................................

• Operates from +15 to 48 VDC
• Phase current from 0.3 to 3.0 Amps Peak
• Step Resolutions from Full to 256 microstepping
• Hold current reduction capability with adjustable current and timeout settings
• Three optically isolated control inputs and one optically isolated control output
• Pole Damping™ Technology

Do You Also Need