| Integrated Motor Controller+Driver+Encoder/ SilverPak 17CE |
 |
 |
 NEMA 17, 1.8º Bipolar Step Motor
Operates from +12 to 40 VDC
Phase current ranges from 0.1 to 2.0 Amps Peak
Step Resolutions of 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
1.50 Amp Chopper (PWM) Driver
Two Digital I/O's and two dedicated Inputs
Execution Halt Pending a Switch
Pre-wired for Opto Switch Inputs
Homes to an Opto Sensor
Fully programmable ramps and speeds
Software selectable Hold and Move currents
Stand Alone Operation with no connection to PC
Stores up to 16 different programs at once with 4 kBytes of memory
Up to 84.8 oz-in of Holding Torque |
|
  |
|
|
|
 |
SilverPak CE comes with a built-in Encoder*
- Max 1250 cycles per revolution (CPR)
- Max 1600 pulses per revolution (PPR) (quadreture)
- 2 channel quadrature TTL squarewave outputs
- Optional index (3rd channel)
*The Silverpak CE is not a closed loop control. A separate controller must be used in order to read from the encoder.
The Designer's Kit (sold separately) enables first time users to become well acquainted with the options of our Silverpak C..
RS485 Designer's Kit (Lin part number: 083-00004) Includes:
- RS485 to RS232 Converter Card
- An Optical Sensor
- Red Switch Push Button
- Extra wiring for I/O
USB485 Designer's Kit (Lin part number: 083-00026) Includes:
- USB485 Converter Card
- An Optical Sensor
- Red Switch Push Button
- Extra wiring for I/O
SilverPak CE has a NEMA Size 17 Step Motor, and comes in three different sizes:
| Part # |
Motor Body Length |
Holding Torque |
| 4118S |
2.69" (6.83cm) |
30 oz-in (21.19N-cm) |
| 4118M |
2.92" (7.42cm) |
45 oz-in (31.79 N-cm) |
| 4118L |
3.24" (8.23cm) |
85 oz-in (60.03 N-cm) |
|
|
|
|
 |
- INPUT VOLTAGE: +12 to 40 VDC
- DRIVE CURRENT(PER PHASE): 0.1 to 2.0 Amps Peak
- ISOLATED INPUTS: I/O, I/O, Switch Closure to Ground, Opto Phototransistor
- STEP FREQUENCY (MAX): 16.7 kHz
- STEPS PER REVOLUTION (1.8 MOTOR): 400, 800, 1600, 3200, 6400, 12800, 25600, 51200
|
|
|
|
 |
 |
 |
 |
|
 |
- A. DB-9 Connector for Controls
- B. Motor Front Shaft Extension Length
Standard Length is 0.94" (23.9mm)
- C. Motor Shaft Diameter
Standard is 0.197" (5 mm)
- D. Overall Body Length
Small: 2.69" (6.83cm)
Med: 2.92" (7.42cm)
Large: 3.24" (8.23cm)
- E. Connector for Encoder
|
 |
|
|
|
|
 |
Pin Number |
Color
(#26 AWG Lead) |
Function |
Input * |
1 |
Red |
+V (Main power In) |
|
2 |
Black |
I/O |
1 |
3 |
Brown |
RS485B (-) |
|
4 |
Black/White |
RS485A (+) |
|
5 |
Orange |
Swithch Closure to GND (IN) |
4 |
6 |
Green |
GND (-V of main pwr in) |
|
7 |
White |
Opto Sensor Phototransistor (IN) |
3 |
8 |
Blue |
I/O |
2 |
9 |
Yellow |
Opto Sensor LED (Power Out) |
|
|
The DB-9 provides power and controls |
| * Inputs are labeled 1, 2,3 and 4 for programming the 'halt' and 'skip' Commands. See Silverpak CE manual for more information. |
|
|
|
|
|
|
|
 |
 |
Power Supply
PW100
24 or 48V (100W) |
 |
|
|
|
|
Power Supply
PW150
24 or 48V (150W) |
|
|
|
| |
|
|
|
|
|
|
