| Integrated Motor Controller+Driver/ SilverPak 17C |
 |
 |
 NEMA 17, 1.8º Bipolar Step Motor
Operates from +12 to 40 VDC
Phase current ranges from 0.1 to 2.0 Amps Peak
Step Resolutions of 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
Two Digital I/O's and two dedicated Inputs
Execution Halt Pending a Switch
Pre-wired for Opto Switch Inputs
Homes to an Opto Sensor
Fully programmable ramps and speeds
Software selectable Hold and Move currents
Stand Alone Operation with no connection to PC
Stores up to 16 different programs at once with 4 kBytes of memory
Up to 84.8 oz-in of Holding Torque |
|
  |
|
|
|
 |
The Designer's Kit (sold separately) enables first time users to become well acquainted with the options of our Silverpak C..
RS485 Designer's Kit (Lin part number: 083-00004) Includes:
- RS485 to RS232 Converter Card
- An Optical Sensor
- Red Switch Push Button
- Extra wiring for I/O
USB485 Designer's Kit (Lin part number: 083-00026) Includes:
- USB485 Converter Card
- An Optical Sensor
- Red Switch Push Button
- Extra wiring for I/O
SilverPak D has a NEMA Size 17 Step Motor, and comes in three different sizes:
| Part # |
Motor Body Length |
Holding Torque |
| 4118S |
2.69" (6.83cm) |
30 oz-in (21.19N-cm) |
| 4118M |
2.92" (7.42cm) |
45 oz-in (31.79 N-cm) |
| 4118L |
3.24" (8.23cm) |
85 oz-in (60.03 N-cm) |
|
|
|
|
 |
- INPUT VOLTAGE: +12 to 40 VDC
- DRIVE CURRENT(PER PHASE): 0.1 to 2.0 Amps Peak
- ISOLATED INPUTS: I/O, I/O, Switch Closure to Ground, Opto Phototransistor
- STEP FREQUENCY (MAX): 16.7kHz
- STEPS PER REVOLUTION (1.8 MOTOR): 400, 800, 1600, 3200, 6400, 12800, 25600, 51200
|
|
|
|
|
|
 |
Pin Number |
Color
(#26 AWG Lead) |
Function |
Input * |
1 |
Red |
+V (Main power In) |
|
2 |
Black |
I/O |
1 |
3 |
Brown |
RS485B (-) |
|
4 |
Black/White |
RS485A (+) |
|
5 |
Orange |
Swithch Closure to GND (IN) |
4 |
6 |
Green |
GND (-V of main pwr in) |
|
7 |
White |
Opto Sensor Phototransistor (IN) |
3 |
8 |
Blue |
I/O |
2 |
9 |
Yellow |
Opto Sensor LED (Power Out) |
|
|
The DB-9 provides power and controls |
| * Inputs are labeled 1, 2,3 and 4 for programming the 'halt' and 'skip' Commands. See Silverpak CE manual for more information. |
|
|
|
|
|
|
|
|
