Buy OnlineShopping Cart
             
 
 
 
 
Step Motor
NEMA Size 8
NEMA Size 11
NEMA Size 14
• Step Size 0.9 °
NEMA Size 17
• Step Size 0.9 °
NEMA Size 23
• Step Size 0.45°
NEMA Size 34
• Step Size 0.9 °
Integrated Motors
BLDC Motors
NEMA Size 23
NEMA Size17
Drivers
Drivers + Indexer
Drivers+ Controllers
Trinamic - Microchips
Power Supplies
Gearheads
Optical Encoders
Accessories
     
stepper step motor motors stepper motor step motor
Custom Design  
Lin Engineering can design and manufacture motors specific to your environmental, mechanical, and dimensional requirements.
Shaft
..Modifications
Custom
..Housings

High
..Temperature/
..Vacuum
..Environments
IP65
bulet IPX7
Added
..Value
..Assemblies
Lead Wires
..& Cables
General
..Options
Step Motor Selection Made Easy

 

 

Shaft Modification
Multiple Flat Options
 
Slotted Shaft Options
Cross Drilled Shaft Oversized
Shaft		 Hollow
Shaft		 Extended
Shaft		 Extended
Shaft
Helical Cut
 
Press Fit Gear & Pulley
   

 

 

 

 

Custom Housings
Lin Engineering can design and manufacture motors specific to your environmental, mechanical, and dimensional requirements.
Clean Room Environment
Stainless Steel
Anodize Finish
Assembly Integration

 

 

 

 

 

Vacuum Environments
NEMA 11, 1.8 degree Motor
Up to 16 oz-in holding torque
Vacuum Ratings from 10 Torr to 10Torr

 

 The vacuum rated motor measures a mere 1.1” square and is available in three lengths: the 211-13 is 1.24”, the 211-18 is 1.75” and the 211-20 is 1.99.” In order to make these small but powerful motors vacuum rated, Lin Engineering ensures that all of the special handling and parts necessary are used in the manufacturing process. First of all, all paint and oils are removed from the motor. Next, high temperature windings are utilized as well as Teflon leads. Lastly, depending on the rating of the vacuum environment, either no-lube stainless steel bearings or special-lube stainless steel bearings are used. During the entire manufacturing process, latex gloves are worn to ensure that no residue from human touch is left behind on the motors. All of the above special parts and handling ensure that limited outgassing and contamination will occur.

NEMA 17 and 23 vacuum motors are also available, please contact Lin Engineering for more information.
Note: click here motor specifications.
IP65 Rated Motors
Available in 1.8 degree NEMA 17 & 23
Protected against dust, low pressure jets of water
Better Protection from Damaging Environmental Elements
FDA Approved


The IP65 Series of motors are totally protected against dust as well as guaranteed to withstand low pressure jets of water sprayed from all directions from a distance of 3 meters. These jets of water can carry pressure of up to 30 kPa from all directions at a rate of 12.5 l/min for the duration of 3 minutes. In addition to being protected from environmental factors, the coating on our IP65 Series motors is also FDA approved.

For smaller or larger IP65 motor, please contact sales@linengineering.com or call (408) 919-0200

IPX7 Rated Motors
bullet Available in 1.8 Degree NEMA 23
bullet Protected against dust; Submersible in depths of 15cm to 1m
bullet Better protection from Damaging Environmental Elements
bullet FDA Approved
IPX7

The IPX7 series of motors are completely protected against dust; they are also made to withstand immersion into liquids in depths of 15cm to 1m for time periods of up to 30 minutes.   In addition to being protected from environmental factors, the coating on our IPX7 Series motors is also FDA approved.  The Lin Engineering 5718 series step motors are now available with an IPX7 rating.  The 5718 is a 1.8, NEMA size 23 stepper motor that has a MAX body length of 2.25”.  This motor is available in three stack lengths is capable of producing holding torque up to 294 oz-in.  Unipolar and bipolar windings are available to allow for the torque and speed required to accommodate your application.

For smaller or larger IPX7 rated motors, please contact sales@linengineering.com or call (408) 919-0200.
High Temperature / Vacuum Environments
Dry Bearings
Special Lube Stainless Steel Bearings
Non-Outgasing Lubricants

 

 

Lead Wires & Cables

 

 

 

 

Added Value Assemblies

Heavy Duty Offest Spurs
Gearhead - Size 23
more details...

Heavy Duty Offest Spurs
Gearhead - Size 17
more details...

Planetary
Gearhead - Size 23
more details...
Encoder available - More details...

 

 

 

 

 

General Constructions

 

Copyright© Lin Engineering 2005. All Right Reserved . 1990 Russell Avenue, Santa Clara, CA 95054. Tel:408-919-0200. Fax:408-919-0201 email: sales@linengineering.com

| step motor | step motors | stepper motor | stepper motors |