 |
|
 |
 |
| Standard Motor |
 NEMA Size 34 Mounting
High Resolution 0.9° Full Step Angle
Wide Selection
Cost Effective
Additional Windings Available
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| • Please complete our application data sheet for different windings. |
| • 6 wire motors are reported as unipolar ratings. |
| • Power supply voltage can be any value as long as the driver output current is controlled at the rated current. |
| • Call Lin Engineering for additional bipolar, Unipolar, or T-connection torque curves. |
• Performance, use, and appearance specifications of the products listed here are subject to change without notice
• Motor currents are listed in RMS (Amp/Phase and RMS are the same value. Peak Current is 1.4 times the Amp/Phase or RMS value).
Can't find the motor performance you're looking for? Click here to Design your motor in 3 easy steps. |
|
|
 |
|
|
|
|
|
|
 |
 |
|
 |
 |
|
Model 8609S-02S (0.9° Step Motor)
24 vDC,3.15 Amp/Phase, Series Bipolar, 1/2 Stepping |
Model 8609S-02P 0.9 ° Step Motor)
24 vDC,6.3 Amp/Phase, Parallel Bipolar, 1/2 Stepping |
 |
 |
|
Model 8609M-02S (0.9° Step Motor)
24 vDC,2.8 Amp/Phase, Series Bipolar, 1/2 Stepping |
Model 8609M-02P (0.9 ° Step Motor)
24 vDC,5.6 Amp/Phase, Parallel Bipolar, 1/2 Stepping |
 |
 |
|
Model 8609L-02S (0.9° Step Motor)
24 vDC,2.8 Amp/Phase, Series Bipolar, 1/2 Stepping |
Model 8609L-02P (0.9° Step Motor)
24 vDC,5.6 Amp/Phase, Parallel Bipolar, 1/2 Stepping |
 |
 |
|
|
|
 |
| Lin Engineering can design and manufactures stepper motors specific to your environmental, mechanical, and dimensional requirements for step motors. click on image to view our options |
|
|
 |
|
Lin Engineering step motors are available with either 2-coil Bipolar, or 4-coil Unipolar windings. Bipolar motors have 4 leads, while unipolar motors have 6 leads. Additionally, some stepper motors are designed with 8 leads, so they may be connected in a variety of ways.
Click here to view our connection instruction
|
|
 |
Address: 1990 Russell Avenue , Santa Clara, CA 95054
Tel: (408) 919-0200 Fax: (408) 919-0201
Email: sales@linengineering.com, techsupport@linengineering.com
To find your local sales office, click here
|
|
|
 |
|
 Frame Size 34-Step size 0.9 °-Model Number 8609
3D MODEL IN STEP FILE FORMAT (.STP)
 -3D-Model Number 8609L (Single Shaft)
-3D-Model Number 8609L (Double Shaft)
-3D-Model Number 8609M (Single Shaft)
-3D-Model Number 8609M (Double Shaft)
-3D-Model Number 8609S (Single Shaft)
-3D-Model Number 8609S (Double Shaft)
|
|
 |
 |
Driver
R325
3A, 256xstep |
 |
|
 |
 |
Driver/ Controller
R101
2.5A, 8xstep |
|
|
|
 |
Power Supply
PW100
24 or 48V (100W) |
|
|
|
|
 |
Driver
R701
7A, 10xstep |
|
|
|
|
Power Supply
PW150
24 or 48V (150W) |
|
|
|
| |
|
|
|
|
|
|
|
|
