Buy OnlineShopping Cartex
 
 

 
 
Step Motor
NEMA Size 8
NEMA Size 11
NEMA Size 14
• Step Size 0.9 °
NEMA Size 17
• Step Size 0.9 °
NEMA Size 23
• Step Size 0.45°
NEMA Size 34
Integrated Motors
BLDC Motors
NEMA Size 23
NEMA Size17
Drivers
Drivers + Indexer
Drivers+ Controllers
Trinamic - Microchips
Power Supplies
Gearheads
Optical Encoders
Accessories
     
stepper step motor motors stepper motor step motor
High Torque Motor
High Torque
High Step Accuracy
High Resolution
Custom Windings Available (No addtional cost)
Inquire about RoHS versions
 
| BIPOLAR |    
1.74"
44.2 mm 		5709X-01S 1.40 98.0 0.69 3.0 6.0 0.70 1.05 4
5709X-01P 2.80 98.0 0.69 0.8 1.5 0.70 1.05 4
5709X-15S 2.10 98.0 0.69 1.2 2.3 0.70 1.05 4
5709X-15P 4.20 98.0 0.69 0.3 0.6 0.70 1.05 4
2.20"
55.9 mm 		5709M-02S 2.10 175.0 1.24 1.6 5.8 1.50 1.50 4
5709M-02P 4.20 175.0 1.24 0.4 1.5 1.50 1.50 4
5709M-05S 1.40 175.0 1.24 3.8 13.1 1.50 1.50 4
5709M-05P 2.80 175.0 1.24 0.9 3.3 1.50 1.50 4
3.08"
78.2 mm 		5709L-01S 1.40 263.0 1.86 4.5 15.1 2.60 2.20 4
5709L-01P 2.80 263.0 1.86 1.1 3.8 2.60 2.20 4
5709L-04S 3.30 263.0 1.86 0.8 2.5 2.60 2.20 4
5709L-04P 6.60 263.0 1.86 0.2 0.6 2.60 2.20 4
| UNIPOLAR |
1.74"
44.2 mm 		5709X-01 2.00 70.0 0.49 1.5 1.5 0.70 1.05 6
5709X-15 3.00 70.0 0.49 0.6 0.6 0.70 1.05
6
2.20"
55.9 mm 		5709M-02 3.00 125.0 0.88 0.8 1.5 1.50 1.50 6
5709M-05 2.00 125.0 0.88 1.8 2.5 1.50 1.50 6
3.08"
78.2 mm		 5709L-01 2.00 188.0 1.33 2.3 3.8 2.60 2.20 6
5709L-04 4.67 188.0 1.33 0.4 0.6 2.60 2.20 6
• Please complete our application data sheet for different windings.
• Power supply voltage can be any value as long as the driver output current is controlled at the motor's rated current.
• Call Lin Engineering for additional Bipolar torque curves.
• Performance, use, and appearance specifications of the products listed here are subject to change without notice.
• For operationg temperatures, click here
• Motor currents are listed in RMS (Amp/Phase and RMS are the same value. Peak Current is 1.4 times the Amp/Phase or RMS value)
Can't find the motor performance you're looking for?  Click here to Design your motor in 3 easy steps. 
Step Motor Selection Made Easy
 
Standard Motor
Model 5609
.................................

 

 
 
 
Lin Engineering can design and manufactures stepper motors specific to your environmental, mechanical, and dimensional requirements for step motors. click on image to view our options
Shaft
..Modifications
Custom
..Housings

High
..Temperature/
..Vacuum
..Environments

Added
..Value
..Assemblies
Lead Wires
..& Cables
General
..Options
 

Lin Engineering step motors are available with either 2-coil Bipolar, or 4-coil Unipolar windings. Bipolar motors have 4 leads, while unipolar motors have 6 leads. Additionally, some stepper motors are designed with 8 leads, so they may be connected in a variety of ways.
Click here to view our connection instruction

 

Address: 1990 Russell Avenue , Santa Clara, CA 95054
Tel: (408) 919-0200 Fax: (408) 919-0201
Email: sales@linengineering.com, techsupport@linengineering.com

To find your local sales office, click here

 
Frame Size 23-Step size 0.9 °-Model Number 5709

3D MODEL IN STEP FILE FORMAT (.STP)
-3D-Model Number 5709L (Single Shaft)
 -3D-Model Number 5709L (Double Shaft)
-3D-Model Number 5709M (Single Shaft)
-3D-Model Number 5709M (Double Shaft)
-3D-Model Number 5709X (Single Shaft)
-3D-Model Number 5709X (Double Shaft)

Driver
R208
2A, 8xstep
Driver/ Controller
R164
1.5A, 64xstep
Power Supply
PW100
24 or 48V (100W)
   
Driver
R325
3A, 256xstep
Driver/ Controller
R101
2.5A, 8xstep
Power Supply
PW150
24 or 48V (150W)
   
Driver
R701
7A, 10xstep
       

Copyright© Lin Engineering 2005. All Right Reserved . 1990 Russell Avenue, Santa Clara, CA 95054. Tel:408-919-0200. Fax:408-919-0201 email: sales@linengineering.com

| step motor | step motors | stepper motor | stepper motors |